[Visual Voice]
VisualVoicePath=D:\PHONES~1
SystemFilesPath=D:\PHONES~1
PhoneLine=1
FileFormat=3
MaxCallRings=6
InterDigitStart=1
ServerMode=0
ConserveThreads=1
Blocking=1
WinkStart=0
PhoneLineType=0
ConvertFileFormats=0
AutoAllocateLine=0
 
[Channel Parameter Block]
ansrdgl=-1
intflg=4
noanswer=1400
 
[Control Block]
flashtm=18
;flashtm=50
pausetm=200
;r_on=3
;r_off=5
;r_ird=80
;redge=2
 
[DTI]
DTG_PDDLFTIM=50
 
[Tone Definitions]
; Describe any custom tones (not touch tones) you want to detect here.
 
; Custom tone definition for detecting a fax machine 'send' signal.  Creates a
; single tone cadence pattern which listens for a 1100Hz tone (20 Hz
; deviation).  The cadence is on for 1/2 second (0.1 second deviation),
; followed by 3 seconds of silence (0.1 second deviation).  This pattern
; must occur 2 times before the ToneDetected event is triggered.
; T1=1100, 20, 50, 10, 300, 10, 2
 
; Custom tone definition for detecting a fax machine 'receive' signal.  Creates a
; single tone of 2085 Hz (20 Hz deviation).  The event is triggered when
; the leading edge (the beginning) of the tone is heard.  This tone should
; be similar to a signal from a modem as well.
; T2=2085, 20, L
 
; Custom tone definition for detecting a standard North America dialtone.
; Creates a single tone of 400 Hz (25 Hz deviation).
; T3=400,25,50,-50,0,0,0
 
; Custom tone definition for detecting a standard North America busy signal.
; Creates a dual tone of 480 Hz (30 Hz deviation) and 620 Hz (40 Hz deviation).
; The cadance is on for 1/2 second (0.1 second deviation), followed by 1/2
; seconds of silence (0.1 second deviation). This pattern must occur 2 times
; before the ToneDetected event is triggered.
; T4=480,30,620,40,50,5,50,5,2
 
; Custom tone definition for detecting a standard North America fast busy
; signal. Creates a dual tone of 480 Hz (30 Hz deviation) and 620 Hz
; (40 Hz deviation). The cadance is on for 1/4 second (0.1 second deviation),
; followed by 1/4 seconds of silence (0.1 second deviation). This pattern
; must occur 2 times before the ToneDetected event is triggered.
; T5=480,30,620,40,25,5,25,5,2
 
[Tone Presentation]
; Describe how you want custom tones presented here.
; T1=ToneDetected
; T2=ToneDetected
; T3=ToneDetected
; T4=ToneDetected
; T5=LineDropped
 
[T1]
Initialize = ALBL
TimeSlotRing = AHBH
TimeSlotDrop = ALBL
PickUp = AHBH
Hangup = ALBL
; Wink=AB
TimeOut = 5000
NumT1Boards = 1
Board1 = 1
VVT1Config=0,1,1
[Test Mode]
TestMode=Off